|
|
Post by SC00T3R on Nov 2, 2005 17:32:05 GMT -5
ok this may sound stupid but what is the widest rim i can get under the stock rear fenders with a pretty good off set on them (i love the work rims that r on the fc in last months superstreet issue) id like to get a 17x10 if i can under the car so if anyone knows please tell me
thanx
|
|
|
|
Post by ReactionEffect on Nov 2, 2005 18:45:10 GMT -5
I have 17x9 with 35mm off set with 275-40-17s and I will need to roll my fenders for these. If I ran 255x40 like Donnie I will be good to go.
|
|
|
|
Post by DriftHappy on Nov 2, 2005 19:02:29 GMT -5
You can run a 17x10 in a +12 offset but you will have to roll your fenders & stretch a narrower tire like a 245-40 or 45 on it. 5Zigen makes there FN01RC's in that size and offset for about $220 each.
|
|
|
|
Post by hypothermix on Nov 2, 2005 20:31:22 GMT -5
is this on a N/A? 17x10 wouldn't be worth it on a n/a car. 17x9 in the rear with a 27 offset I'm running 235/45/17
|
|
|
|
Post by SC00T3R on Nov 2, 2005 23:06:19 GMT -5
no i plan on putting a wide rim on it as soon as i finish up my other engine which may be turbo charged or n/a i have not decided but i do plan on doing a stage 2 street port job on the engine with a lot of port matchin on the intake and exhaust to
my father also has some other ideas he has been pondering
i also have a twin turbo unit off of a 3rd generation rx-7 that i got for free and can not decide what to do with it
|
|
|
|
Post by DriftHappy on Nov 2, 2005 23:41:02 GMT -5
Your best off selling the TT unit because it is pretty much useless to you. Also if you run a 10 in the rear you might want to see if you can run a 265 or so. It would be much more comfortable. Something like a 17x9 would be the widest I would probably go though.
|
|
