|
|
Post by twinrotorfb on Oct 24, 2005 15:01:32 GMT -5
Hey guys, this is my old 12A we shoved in an '84 -SE(the car belongs to a good friend of mine). Its a stockport with a 450CFM Holley atop a RB intake and header. Hes gonna drive the car a bit with this setup, then in gos some boost. Gonna take it to Centerville too I'm sure. I havn't drove the car yet, but it should be a bit stronger than my stock Nikki/exhaust. I'll find out soon enough after I tune it a bit.. media.putfile.com/rx-7-slide2media.putfile.com/rx-7-slideBen |
|
|
|
Post by hypothermix on Oct 24, 2005 16:42:30 GMT -5
sounds good
|
|
|
|
Post by Mr.President on Oct 24, 2005 17:03:06 GMT -5
i love it when its in the high rpm's , they sound so freaking good.
|
|
|
|
Post by rxkevin on Oct 24, 2005 18:55:46 GMT -5
sounds good!
|
|
|
|
Post by Rotorhog on Oct 7, 2006 11:30:00 GMT -5
Ben, has the above mentioned car been running at C'ville? A couple of people have asked if I've been running a 1st gen over there. It's not me, I hear there's a guy from LR who runs a 1st gen called Franken-Rex at C'ville. His has a Ford 5.0 litre stuffed in it.
|
|
|
|
Post by twinrotorfb on Oct 2, 2007 14:33:50 GMT -5
Actually, he did make a few passes at C'ville one night.. Ran a best of 13.4 because he couldn't get it into 3rd gear every pass  Sadly, the car has sat as long as mine. I tried to get him to sell the 12A back to me this spring, but he wouldn't. He tried to fire it in March, but it has no compression on housing 1 since it sat so long. He called me after he tried firing it and I asked him if he lubed it before he tried cranking it.. Of course not.. So its probally trashed now.. I saw the "Franken-Rex" you're talking about last year.. Made me want to cry.. When he was running that night, he was only in the 12's. Kinda sad if you ask me.. Must have been a weak 302. He didn't want to talk to me much though as the first thing I asked was "Wheres the 12A?".....  |
|
