marix1521
Rotary Enthusiast
Tau Kappa Epsilon
Posts: 20
|
Post by marix1521 on Aug 18, 2005 1:27:23 GMT -5
Blake (my friend), Dewayne (razorback), and myself may be opening a rebuilding and porting shop in the Jonesboro area. If anyone needs a rebuild let us know. The more business we can get right off the bat, the sooner we'll open up shop. Keep me updated on the need of rebuilds.
Note: We will NOT do 3mm milling. If your engine already is milled to 3mm we will use 3mm seals, but we will not mill it out for them.
|
|
|
Post by RedBeauty84ZX on Aug 18, 2005 1:57:37 GMT -5
I'll sticky this for you.
|
|
marix1521
Rotary Enthusiast
Tau Kappa Epsilon
Posts: 20
|
Post by marix1521 on Aug 18, 2005 3:39:58 GMT -5
thanks
|
|
|
Post by DriftHappy on Aug 18, 2005 10:30:13 GMT -5
I'd be interested but I really want to learn how-to myself since I already have the tools and space to rebuild my own. But I will definitely need another core & some porting done. Razorback did a pretty good job on the half-bridge he did. I'm up for the same or a large streetport.
|
|
|
Post by Mr.President on Aug 18, 2005 19:22:43 GMT -5
hopefully i dont need a rebuild netime soon, but I would consider it if she went out. I can also recommend you guys if needed.
|
|
marix1521
Rotary Enthusiast
Tau Kappa Epsilon
Posts: 20
|
Post by marix1521 on Aug 18, 2005 20:16:41 GMT -5
i would appreciate recommendations a lot
and razorback is going to be doing all the port work untill he goes back to college. then i will be doing it.
|
|
|
Post by Mr.President on Aug 18, 2005 21:51:30 GMT -5
that would be pimp if there was a rotary shop here closer to NW hopefully you guys can get something going
|
|
marix1521
Rotary Enthusiast
Tau Kappa Epsilon
Posts: 20
|
Post by marix1521 on Aug 19, 2005 5:10:59 GMT -5
if you drive 90 the whole way on the interstates, it's about a 4 - 4.5 hour drive from Jonesboro to Fayetteville... that's really not that far. how much closer do you want us to be? lol
|
|
|
Post by Mr.President on Aug 19, 2005 10:19:13 GMT -5
no im saying that its pimp if you do open a shop there because that is closer.
|
|
marix1521
Rotary Enthusiast
Tau Kappa Epsilon
Posts: 20
|
Post by marix1521 on Aug 23, 2005 0:25:37 GMT -5
ah.. ok.. mass confusion
|
|
|
Post by razorback on Aug 29, 2005 3:08:58 GMT -5
if you drive 90 the whole way on the interstates, it's about a 4 - 4.5 hour drive from Jonesboro to Fayetteville... that's really not that far. how much closer do you want us to be? lol is that travel time including the ticket you got? ;D
|
|
|
Post by ReactionEffect on Aug 29, 2005 23:30:57 GMT -5
Little advice... It probably doesn't look good on a business stand point that one of the guys building engines, swapped his out for V8.
|
|
marix1521
Rotary Enthusiast
Tau Kappa Epsilon
Posts: 20
|
Post by marix1521 on Sept 1, 2005 0:10:51 GMT -5
So he wanted a V8 for a little while? He still likes the rotaries... he wants a turbo 1st gen or a 3rd gen. and no, dewayne... the travel time was on the way back, you f**kbag
|
|
|
Post by razorback on Sept 1, 2005 0:56:04 GMT -5
Little advice... It probably doesn't look good on a business stand point that one of the guys building engines, swapped his out for V8. if you knew the condition of the wiring and other misc crap i had to deal with you would of understood why. and because i put a v8 in my car makes me not like rotaries suddenly? sorry, but that doesnt work. how bout judge the business based on the work i do porting and the work others do rebuilding? take these for example: when you can port and rebuild like that, then we can talk.
|
|
|
Post by Mr.President on Sept 1, 2005 15:50:51 GMT -5
i dont think he was trying to be offensive. Looks like great port work BTW.
|
|